How Do Bicycles Work?

A bicycle, also known as a touring bicycle or tour bicycle, is a pedal-operated, single-wheel bicycle, with two wheels attached to a rigid frame, typically at the front and back. A bicycle rider is commonly known as a Tourist, or Tourist. There are many kinds of bicycles. Some are made for touring by people on foot, some for cycling on flat ground, and some for mountain biking. A bicycle is used for many different transportation purposes.

Bicycle touring bicycles have wide, upright frames with the front wheel left of the seat. The handlebars are at the front, and the pedals are below the saddle. These bicycles are often equipped with front and rear shocks and gears. The front wheel is usually mounted on a freewheel, which is a small chain link with one or two gears on each side.

Most bicycles are classified by the kind of drive system they use. Direct-cut brakes are used on one-wheel drive bicycles, which are also referred to as “rammed bicycles.” Fork-laying bicycles are ones in which the sprocket is directly driven off the rear wheels, while the fixed-imspecifically-shaped brake systems are those in which the sprocket is connected to the wheel on the upper side. Many bicycles, regardless of their drive system type, have pedals.

One important difference between a bicycle with one wheel and a bicycle with two wheels is the amount of leverage available. A bicycle with two wheels has less leverage than a bicycle with one wheel. Therefore, it can only be used to climb hills. It cannot be used to negotiate city streets.

A bicycle with pedals, sometimes called a velocipede, is an electric bicycle with pedals and no motor. The rider can, however, be attached to the bicycle with pedals or by means of a foot pump. The pedals of a velocipede are attached to the frame at the front or back, depending on the style of the bicycle. Usually the pedals are made of steel, but materials such as titanium, carbon fiber, or aluminum can also be used.

According to thenmah, bicycles should have at least two wheels. However, most bicycles have three wheels, four wheels, five wheels, six wheels, seven or eight wheels, nine or ten wheels, or even more. Some kinds of bicycles even have rear derailleurs, which allow the rider to change gears without turning the pedals. The number of gears on a bicycle is mostly self-etermined, although most bicycles have a front gear of either 8 teeth, a front chain drive, or a back gear, which is like a small gearbox on a car.

Global Positioning Systems (GPS) And Their Uses

Global Positioning System (GPS) is a constellation of low-earth orbit satellites. These global positioning system or GPS satellites are in an synchronous orbit above the Earth. The system was initially developed and controlled by the U.S. Department of Defense. Today, the system is used in a number of ways by government agencies like the Department of Homeland Security, the Transportation Safety Administration, the Internal Revenue Service and the Federal Emergency Management Agency among others. A Global Positioning System also known as a GPS, has become the backbone of modern mobile technologies such as GPS enabled cell phones, laptops, lap top computers and other portable devices. These devices can be equipped with software applications that provide the user with accurate positioning data.

goes

Global Positioning Systems are operated by ground-based receivers called the pointing, tracking and relaying equipment. These equipments are often installed on fixed points either in the sky or on the ground. There is another category of GPS which goes by different names like operational geostationary orbit, geostationary transfer orbit, satellite orbit, relay timing clocks and fixed position tracking satellites. The operational GPS was first used to track and locate troops in the battlefield. This technique has since been adapted for navigation, mapping, rescue operations and aircraft tracking.

In general, operational goes west is the global positioning system that coordinates GPS receivers located in terminals or satellites to the terminals of users in different parts of the world. It can either use the regular GPS techniques such as plotting positions using latitude and longitude or track routes using latitude and longitude plus a series of other parameters such as speed and fuel consumption. The second type of global positioning system, known as the geostationary orbit GPS, does not require users to plot positions using latitude and longitude but it uses GPS techniques to determine latitude and longitude automatically. Geostationary satellites also provide users with accurate time and location data.

Global Positioning Systems (GPS) have recently become popular among vehicle owners due to its capability to help them with navigation. However, GPS systems have had their fair share of problems in relation to accuracy and reliability of location data. A GPS system used for vehicle navigation may fail to give correct locations if the source of power is lost or goes down while drivers are on the road.

Both the GPS systems, operational goes west and geostationary satellites use the same technology. One major difference between the two lies in the fact that operational goes West cannot command a device located on the ground while geostationary satellites can do so. While operational GPS devices are more expensive than geostationary ones, they are far more reliable. GPS systems today have become a necessity for motorists, pedestrians, criers and others who need precise location information. They also help businesses by improving customer service by providing customers with accurate arrival times.

There are two main types of GPS devices used in automobiles; GPS system that is installed in cars and allows vehicle owners to control it; and GPS system that is installed on receivers which are placed in fixed positions such as tables or desks. Today, GPS manufacturers are making specialized receivers that are suitable for outdoor use such as go-r satellites. For consumers, there is a third type called go-sats which can be installed inside buildings, giving superior accuracy over longitudes. A go-sat is highly effective when fitted inside the building where a vehicle is parked, allowing the location of the vehicle to be determined accurately and quickly.

Social Care Guidance Development Groups

nice

Social Care Guidance Development Groups

It is nice to feel appreciated, valued, and even loved. It feels great to own a home and be recognized as an owner. It is nice to get a raise or promotion at work and have people make jokes about you or compliment you on your looks or job skills. But if you have been feeling the sting of having “nice people” in your life, it can be hard to swallow. What exactly is the sting? Here are four of the signs that you may be having too many nice people in your life:

You get what you pay for. This is a huge problem in the health care industry because doctors are very expensive to hire and maintain. However, nice people seem to cost less money to employ than the alternative – low quality, needy individuals. Thus, you can see that nice people are not necessarily more helpful, because there may not be any cost effectiveness to giving nice referrals or extra benefits, like vacations or nice lunch breaks, to those that are not really all that nice.

Nice leads to nccs. If your nice guy friend is always coming to your doctor’s office to pick you up or sending your kids off to school with his wife or girlfriend, you might want to re-evaluate their worthiness. They might not be meeting your needs in terms of medical care, but are bringing in more income than they are paying out. Thus, their nccs reflect the reality that nice guys really do get more out of life. Their nice behaviors are actually cost-effective over the long run, because health care is not free.

Nice is correlated with social care. In addition to directly costing society billions of dollars per year, the problem of under-utilized and uninsured individuals is a major cause of crime and violence. Therefore, nice people do cost society money. Even though there is no way to prevent nice behavior, putting nccsc into practice by putting good, clean needles in accessible locations around schools and hospitals, and making sure that people get access to effective and affordable HIV/AIDS treatment will help cut down on the prevalence of crime and substance abuse.

Nice can go a very long way. When you invest in and join a nice leadership development group, you will gain access to professionals who have studied and practiced effective social care services. Members of such groups understand the problems facing so many people today, especially those living in low-income, minority communities, single-parent households, and those that are left out of various aspects of society. By joining a leadership development group, you will be able to take part in projects that are aimed at ending these problems and providing for better opportunities for all people. You can also choose to get involved in a collaborative project that involves a variety of organizations and agencies dedicated to improving health, safety conditions, economic development, education, drug abuse, domestic violence, and other issues affecting people in a community. By collaborating with others, you can get great results, which will improve the quality of life for everyone.

Are you worried about being “nice”? If so, you shouldn’t be. There are plenty of nice ideas out there, ranging from simply being nice to getting involved in a social care guidance development group, learning how to be an asset to your community and cutting down on crime and substance abuse. Consider what joining a leadership development group, participating in public consultation development groups, or becoming a member of an nccsc could do for you.

Happiness As a Goal

good

Happiness As a Goal

In many contexts, the word good literally means the ideal or the upright course which ought to be chosen when confronted with a decision between good options. Good is usually perceived as the opposite of evil and is therefore of interest in the field of ethics, morals, philosophy and religion. The main reason for this is that good is closely associated with rationality, which is a form of objectivity. Reason is closely related to goodness because it is a form of mental states, which are the basis for making sense and justifying choices. However, it is important to note that we use the term good in different ways and that what appears good to one person may not appear good to another.

According to the traditional morality, there is only one supreme good which is God. The traditional morality defines the ultimate end or purpose of human life by reference to God. This is based on the assumption that humans are rational and can understand the ultimate end or purpose of their life in a distinct and monotheistic way.

According to some other philosophers, however, there is more than one supreme good which includes many levels of morally perfect acts. For instance, an act which leads to happiness is considered a good act, while an act which leads to passion, hatred or fear is not. Anger and joy, for example, may both be considered ends but they differ in the sense that anger, which leads to destruction, destroys things whereas joy causes creation. Similarly, to see a person perfectly is to see him at his most perfect and therefore goodness and happiness are also included in the description of the good.

For Descartes, meanwhile, there are only two ultimate ends or purposes of human life: God and pleasure. He argues that man is basically an animal, with all the other animal characteristics that make up his ability to feel good and be happy arising from a psychological need to survive. The real problem comes from when a person’s happiness is at odds with God’s morality or his utility. Humans must choose whether they are to be moral and good or if their happiness is only a means to an end. Man’s ability to choose between the two options is what makes him a better being than animals who can’t.

According to John Locke, the most important element in determining a person’s happiness is his knowledge of God. Since Locke believes that the only properly moral and good ends are those which are desirable to man as a whole, it follows that to have knowledge of God is to have a good and happy life. To know God is, in fact, to have the good or happiness that is necessary for a complete and satisfactory completion of oneself. In Locke’s logic, knowledge of God can provide a foundation for practical reason because it can help to make possible ends which are necessary and good. Locke thus holds that to know God is to have happiness.

According to some religious ethicists, it is possible to pursue happiness by working hard at making certain things perfect. Perfection, they believe, is good because it sets up an expectation of eventual reward. In other words, a person would be satisfied (and happy) if he had a perfect body, a perfect mind, and a perfect house in which to live. Perfection thus seems to be a good thing, even if it sometimes leads to the person getting caught up in pursuing something that does not have the goodness it initially seems to have.

Get a Great Workout With These Cycling Exercises

bicycle

Get a Great Workout With These Cycling Exercises

A bicycle, also known as a two-wheeled cycle or bicycle, is a manually powered or pedal-operated, single wheeled vehicle, with two wheels connected by a series of gears, linked between them either by a chain or by a wheel, on which the wheels turn. A bicycle rider is commonly known as a bicycle racer, or biker. Bicyclists may ride on any kind of surface – dirt, paved, gravel, sidewalk, or even gummed up roads. Some cyclists prefer mountain bikes, which are stronger and more stable than regular bikes.

The most common type of bicycle is the one with a steel frame and a steel fork. Starley Bicycles manufactures a wide variety of this kind of bicycle, based on various styles, designs and features. The frame of the bicycle can be made from aluminum or from a high-carbon fiberglass. Steel is usually used for the fork.

There are three kinds of wheels that a bicycle can have: the freewheel, the fixed wheel, and the sprocket. The freewheel wheels are normally turned by hand power. The pedals have either a chain or a gear attached to it. The sprocket wheels are attached to the pedals.

The bicycle has been an important mode of transportation since ancient times, dating back to the earliest of days. Today, it is an option for anyone who wants to take a trip or just ride around town. Although it can accommodate two people easily, it’s not very comfortable for those who want to take it riding on mountain bikes. There are various models of bicycle available for sale in the market today, depending on the model, design and type of wheels used. Some of the popular models are the E-Bike, E-Tour, Tourist, Schwinn Airdyne, Zero Motor Bikes, BMX Bike.

Another great way to burn fat and lose weight is to do bicycle crunches. To perform the bicycle crunch, stand on one leg and rest your elbow on the bent knee of the same leg, with your arms hanging down by your sides. Press your body against the leg with your toes and buttocks as if you are doing a bicycle crunch. Slowly lower yourself down, while applying pressure from the top of the thigh and into the hamstring.

This cycling exercise is also known as the bicycle kick. This exercise has many variations, depending on how you perform it. Most people perform it by bending the knees and slightly twisting the ankles, and holding the bicycle firm with both hands. Then, with your feet firmly planted on the ground, slowly press the bicycle into the floor until you can feel the bike sink into the dirt. Slowly and with control, push the bicycle back into position, and while in the up position, kick the legs forward so that you can pedal the bicycle again.

Weather Forecasting – Learn About Your GOES Satellite

The GOES (GOES-series) is a satellite weather system that is operated jointly by the National Oceanic and atmospheric Administration’s National Weather Service and the Department of Transportation. The GOES-series is jointly managed by two different agencies. The NNSA operates the main weather tracking center of the system, while the DOT manages the rest of the system’s operational functions. Both agencies rely on the information provided by the GOES to provide the public with warnings and storm forecasts. A small portion of the United States private space system operates a grid of weather stations that also contribute to this joint venture.

goes

The GOES-series is actually a geostationary satellite. Geostationary satellites circle the Earth twice a day around the Earth as seen from above. The information they provide is used to map the Earth’s climate and how various weather phenomena such as storms, rainfall, snow fall etc. work around the world. For example, areas prone to rain have smaller snowfalls than areas without any. The GOES determines where this weather condition will occur and through data provided by the satellites, the weather service is able to issue clear and reliable storm warnings.

All go satellites carry instruments to track precipitation, clouds, barometric pressure and wind. By using the data accumulated by the instruments, the geostationary orbit can predict where these conditions are likely to be in the next few hours, or days, or even weeks. The data is then fed into computer models which use mathematical algorithms to determine the probability of what kind of weather we’ll experience during any given time period. These models are then used to provide the public with clear and reliable weather forecasts.

For those who are interested in pursuing a career in weather prediction, getting a degree in meteorology may be an option. Meteorology programs are available at several colleges, universities and technical schools. For those who already have a bachelor’s degree, an advanced degree in meteorology can help you land some interesting positions. There are also internship programs for graduate students in meteorology. Although not a full-fledged career, a bachelor’s degree in meteorology opens up many doors within the space weather community and can lead to other exciting positions such as a mission specialist or technician.

If you’re looking to get into operational GOES monitoring, there are a few things you need to know. Most meteorologists have at least a bachelor’s degree, although those with experience working on the GOES satellite can often go on to get jobs with larger and more prestigious firms. To get a position as a field scientist or research scientist, you need to have a master’s degree or higher. The higher your educational attainment, the more likely it is that you’ll have a high-paying position with a prestigious research institution, such as NASA or the National Oceanic and Atmosphere Research Council.

If you want to become a commercial space weather technician, you will have to go through an oral board screening process. While this process isn’t extensive, it does typically involve interviews and background checks. Once you pass these hurdles, you can get your dream job as a space weather technician and be a part of one of the most exciting and important developments in space history. Earth scientists use weather forecasts to determine which techniques and instruments to use in their work, which is why knowing your GOES details is so important. Learning what makes your forecast unique, as well as knowing which patterns will show up next, will give you the edge you need to be the best of the best.

Importance Of Nice Guidelines

There are many synonyms for nice that describe the act of behaving nicely in situations where someone else is being unfair. Some common synonyms for nice are correct, appropriate, correct, and nice. While all of these words essentially mean “correct, suitable, and well-meaning,” other synonyms for nice are intolerant, belligerent, intolerant, spiteful, jealous, spiteful, uncaring, and insistent. I’ve listed the synonyms for nice in this article in order of their negative meaning.

A nice fellow is a nice guy or girl who follows quality standards in social interactions. Most of the time, these people are older, smarter, and wiser than the average person. A nice fellow also tends to have high moral standards. This type of person may not be trustworthy, however he would not be trustworthy with children as well because children are not able to differentiate between what is right or wrong and what is nice.

A nice guidance counselor is a nice person whom one would want to be around in a clinical setting. Clinical research is carried out on human beings under controlled conditions and the nice counselors are the ones who facilitate this process by making sure that the study participants follow study protocols and do what is required. Nice people are very high-quality providers for high-quality social care. The attendees at a clinical research unit can be considered to be high-quality social care providers if they comply with study protocols, follow high-quality academic guidelines, are dedicated, diligent, responsible, and trustworthy.

A nice person at a nccsc will be an asset to the organization in various ways including providing quality standards of social care. The role of a nccsc is to ensure compliance with social care service legislation by its designated staff. The employees in a nccsc are dedicated to ensuring that all of their participants comply with their respective directives, are friendly, considerate, responsible, diligent, trustworthy, reliable, and responsible. In order to work effectively in a health organization, each of its staff must be committed to achieving good quality standards.

The role of a quality control officer at a nccsc plays a crucial role in ensuring that the standards are maintained. The officers assess the need for and success in obtaining clinical documentation relating to the procedures and services being provided by the organization. They also deal with the cost-effectiveness of obtaining clinical documentation. This involves identifying the best practice methods for obtaining the necessary documentation from patients, while considering the possibility of sharing the information with other health care facilities and organizations.

The need for adequate clinical guidelines arises when health care professionals cannot agree on which method of documentation is more suitable. When such situations arise, it is the role of the quality control officer to resolve these differences. Good clinical guidelines help ensure the continued improvement of the service delivery process by maintaining acceptable levels of patient safety and comfort. The role of a quality control officer has therefore become increasingly important to healthcare organizations. It is the goal of every medical facility to maintain nice quality standards and to make sure that clinical guidelines are followed in a manner that helps to reduce the incidence of any adverse events or situation that can result in patient injury or discomfort.

Are Good and Evil Justifiers of Actions?

good

Are Good and Evil Justifiers of Actions?

In most contexts, the word good refers to the act that ought to be favored when faced with a decision between different possible actions. Good is usually regarded as the opposite of evil and is therefore of central interest in the study of philosophy, religion, ethics and morality. A good person is a person who behaves morally according to the dictates of moral reason. Bad people are those who do immoral acts, or else those who fail to act at all.

The concept of good and evil is a relative concept, as is the relationship between good and bad. It is thus mistaken to assume that there is a clear-cut distinction between good and evil. The basis for this perception may be found in the fact that ‘good’ and ‘bad’ have different meanings under different circumstances. In general, it is believed that good is that which promotes and tends to promote moral goodness, while ‘bad’ is that which tends to destroy moral goodness and/or leads to wrongful action.

The concept of moral goodness and badness thus enters into the equation by providing a means to distinguish between the right and the wrong, or, to put it differently, to distinguish between right and wrong. According to some moral philosophers, to be morally right is to treat others fairly and likewise to behave in a way that is just and right. This may include treating children, fellow humans, animals, other humans and other animals, with respect. To be morally wrong is to do something that is wrong in one’s estimation, no matter how other people perceive or treat it.

There are good actions and bad actions, right and wrong, and moral goodness or badness. In general, it appears that a range of situations falls somewhere in between these two extremes, hence the expression’morally right’or’morally wrong,’ rather than ‘right and wrong.’ This idea is central to consequentialism, a theory that states that the moral evaluations and actions that we do are caused by the actions and events that follow after the decisions to do them. According to this view, what you do today determines what you will do tomorrow, and how your actions and reactions will turn out. According to some further philosophers, it also may be that what you do today has a definite effect on the future, and what you do today may also have a definite affect on the future.

For some people, even things that seem to be bad are good in disguise. Some people believe that killing someone to stop them from hurting others is not really murder, because the victim was trying to stop a crime, and had given up his life for that. However, killing an innocent human being to protect those you love is morally justifiable if done in self-defense, as in the case of a mother protecting her child from harm.

It seems that there are good and evil that exist parallel to each other. Although there may be a grey area, it appears that good deeds and bad deeds often co-exist and balance each other out. Nevertheless, as we all know, good and evil are associated with one another in most religions. It is interesting to note though that there are many who claim that there are no good or evil, but only choices between good and evil. And this is where philosophy comes in. Philosophy is the attempt to bridge the gap between good and evil.

Some Things to Know About bicycle Safety

bicycle

Some Things to Know About bicycle Safety

A bicycle, also known as a bicycle or pedal cycle, is typically a motor-powered or pedal-operated, single-wheeled, two-wheel cycle, with two wheels connected to a fixed frame. A bicycle rider is commonly known as a bicycle rider, or biker. Bicyclists can take their bicycles for just about any purpose, from a simple stroll around the neighborhood to mountain biking on a challenging trail, to racing dirt bikes on a cross-country trail. In some countries, bicycle riding is a popular sport. For people who have a love of the outdoors and a passion for getting around on two wheels, bicycles are a great way to get around.

Most bicycles have a single chain and a single wheel. Many modern bicycles use either a chainset which links up the front and back wheels of the bicycle, or a sprocket, which rotates the rear wheels. Some bicycles have multiple chains and sprockets, but these are generally less common. Most modern bicycles use chains and/or brakes to slow the bicycle down when the rider wants to slow down, corner, or stop. Some cyclists prefer to use their own brakes for this purpose.

The typical size of bicycle wheels is a “standard” tire, meaning they will be able to handle most types of surfaces. Bicycle wheels can be made of many different materials, including aluminum, steel, titanium, magnesium, plastic, carbon fiber, and several other materials. Bicyclists often choose between aluminum or titanium bicycle wheels because they are more resistant to corrosion, which can happen if the metal is exposed to salt water.

To ride bikes, cyclists wear protective clothing such as a helmet, protective leather gloves, and padded pants. Many bicycles have protective gear as standard equipment. However, riders may also want to add extra items to their bicycles to make them more comfortable. Most bicycle manufacturers sell bicycles with seat covers, saddlebags, and even foot covers that fit over the seat. These items can help prevent the skin from being damaged by road salt or other chemicals that can get sprayed on the bike’s finish. Some people even take sandals off their feet when they ride to avoid getting water spots on the shiny metal finish of their bicycles.

In addition to all of these items, riders may also want to upgrade their bicycle wheels. The most common type of upgrade includes adding spokes to the wheels. This improves the speed and maneuverability of the wheels. Other upgrades include larger and wider brakes, which can make a bicycle easy to control on curbs and other obstacles. Some people upgrade their bicycle’s wheels in order to make them more durable. Many people who purchase their wheels will also buy some kind of spacer, which fits inside the rim and improves the traction on the road.

Regardless of what upgrade is chosen for a bicycle, it is vital that the cyclist takes precautions to ensure that they are as safe as possible when riding their bicycle in public. Bicycle riders should always make sure that they are wearing the proper safety gear, like a helmet, gloves, and shoes. A bicycle accident can be a very serious situation if the right precautions are not taken, so a person must make sure that they are as secure as they can be while riding their bicycle in public.

GOES-R and Fannui 3: Full Disk Surveillance and Monitoring

goes

GOES-R and Fannui 3: Full Disk Surveillance and Monitoring

When Chinese state media announced that China had successfully tested and launched the first ever Chinese-made space probe, many eyebrows went up in surprise. Although China is one of the biggest trading partners in the world today, many still viewed this as a major achievement for them and a huge leap forward in their space program. If history is any indication, however, these expectations were not well founded. While the maiden mission of the Fengyun 3 space probe was successful, many more will need to be done before we can say that China has achieved significant success when it comes to space exploration. As China continues down the road of space exploration, we will continue to learn about their various accomplishments, but they are unlikely to make any profound breakthroughs that will change the overall perception of the country in the eyes of the outside world.

The most significant advancement that China has made when it comes to its space program comes in the form of the installation of its own satellites into geosynchronous orbit around the Earth. These satellites, or space observatories, operate in a similar fashion to the U.S. Air Force’s Global Weather Satellite programs, positioning themselves high above the Earth and transmitting data and information back down to ground stations. Geosynchronous orbit is just that — completely overhead. Because of this, they can observe the sun from greater distances than any other known space telescope.

Two types of geostationary operational satellites are installed into geostationary orbit around the Earth. One is the Fengyun 3, which was launched in 2007. It is believed to be the first ever Chinese-made space probe, and its primary purpose will be to gather data on the makeup of space dust, which has an effect on the functioning of Chinese solar panels. The other satellite, the Jiuquan 2, is scheduled to be operational around the same time as the Fengyun 3, in order to take advantage of China’s new space law, which states that all objects in geostationary orbit must be Chinese. Of these two operational satellites, the Jiuquan 2 is more advanced and technologically superior; however, it will not be operational until 2012. The Fannui 3, by contrast, is still undergoing testing.

The final type of geostationary spaceplane is the advanced baseline imager/weather model. This is essentially a weather balloon, which operates in an earth orbit around the Earth and is designed to take readings of precipitation levels, clouds, winds, and lightning strikes. If the system detects a significant change in the weather, it will trigger a website update, which will then be relayed to the weather model operator who is in the process of updating and maintaining the website. This is a vital function in the monitoring of severe weather around the world, because the weather can have a dramatic impact on the delivery of emergency services and the way emergency situations are managed.

Global Positioning System-Moons (GPS-MOons) are operational environmental satellites. They operate in geostationary orbit around the Earth and are designed to relay precise timing data from the operational satellites. This data is then translated into a digital signal which is decoded and sent back to the ground station where it is used to track precipitation, clouds, and lightning. These signals are then transmitted down to the Global Positioning System-operated earth station. Once there, operators at the earth station can use the information to determine where a satellite may be pointing so that they can prioritize sending emergency services or supplies to affected locations.

With an operational GOES-R and an upgraded and fully-operational Fannui 3, China’s space weather monitoring is sure to stay on pace with advancing technology and demand. The next decade will no doubt bring forth new demands for better weather forecasts. With the next two satellites, China’s space weather mission will be a step ahead of everyone else.